31
ENGLISH
AV LINK Menu - Preset download
-
6.1.
Press the Cursor UP/DOWN buttons
/
to select Pre-
set download. The red point mark indicates the selected item.
6.2.
Press the BLUE button
to begin preset downloading to the
VCR.
6.3.
The message appears on the screen.
.
If the TV is connected to a VCR with AV LINK function or compatible, the
TV automatically transfer the stored TV channels to the VCR.
6.4.
When the message disappears, the programme list of the VCR is now
the same as of the TV set
AV LINK -TIMER PROGRAMMING-
In this menu you can set a late start and stop time for a recording.
1.
Select the channel you wish to record by using the 0
~
9 digit or
/
buttons.
2.
Press the TV/VIDEO button
●
to see the
TV/VIDEO Menu
.
3.
Press the BLUE button
to see the
AV LINK Menu
.
4.
Press the Cursor UP/DOWN buttons
/
to select Timer
programming. The red point mark indicates the selected item.
5.
Press the BLUE button
to see the
TIMER PROGRAMMING
Menu.
6.
Press the Cursor UP/DOWN buttons
/
to select:
Device:
to select the controller set (VCR or TV) [
!
] by using the Cursor
LEFT/RIGHT buttons
/
.
Date:
to enter the recording date using the number buttons. Enter 2 digits for the
date, then 2 for the month. e.g. For July 9th, press 0 9 (9th), then 0 7 (July).
Start/End:
to set a late start and stop time. Enter 2 digits for the hour and 2 for the minutes for the Start, then 2 for the
hour and 2 for the minutes for the End.
Mode:
if you want to make additional recordings at the same time each day or week, use
/
to select Daily or
Weekly.
Speed:
to change recording speed between Standard-Play (SP) and Long-Play (LP), by using
/
buttons.
Standard-Play gives the best picture quality; Long-Play provides the longest recording time.
7.
Press the YELLOW button
«PROG. VCR»
to memorize the TIMER PROGRAMMING data.
8.
Now the VCR should be manually set for Timer Mode. Refer to your VCR operation manual for further information.
9.
Press the TV/VIDEO button
●
to clear the on-screen display.
!
About Device
!
Device VCR»:
preferably select «Device VCR» to memorize the TIMER PROGRAMMING data in video memory
buffer.
When you select «Device VCR», Mode (Unique/Daily/Weekly) and Speed (SP/LP) can be changed only if the video
has these functions available.
!
Device TV»:
when the video cannot accept the TIMER PROGRAMMING data (i.e. when the video has the
memory buffer full), select «Device TV» to memorize the TIMER PROGRAMMING data in TV memory buffer.
When you select «Device TV», the late recording only can be applied within the next 24 hours.
When you select «Device TV», Mode (Unique) and Speed (SP) cannot be changed.
When you select «Device TV», in the event of a power cut, disconnection from the plug or if you turn off the TV by
the Main power button
(
®
)
on the TV set, the TIMER PROGRAMMING data will be cancelled; In order to keep the
programmed data, use Stand-by button
(
æ
TV)
on the remote control to switch off the TV set.
a
a
a
a
a
a
CH
CH
CH
CH
CH
CH
CARGA DE AV LINK:
PROGRAMA XX
CH
CH
AV LINK Menu
BLUE
TIMER PROGAMMING Menu
TV
REAR INPUTS
FRONTAL INPUTS
YELLOW