Sharp 21H-S3P, Operation Manual

Page: 14 / 39

E 13
D i m e n s i o n : 1 7 6 x 2 5 0 m m
P r i n t e l l i g e n c e ( M ) S d n . B h d
Picture In Picture (PIP) Function
With the VIDEO input, you can watch two picture at same time: one
from the TV channel and the other from the VIDEO input.
1
Press
PIP ON/OFF
.
• The inset is displayed to indicate PIP is “ON”.
2
Press
PIP ON/OFF
again.
• The inset screen is disappears to indicate PIP is “OFF”.
PIP On/Off
5 1
PAL
B/G
( AV2)
1
When
PIP.TV/VIDEO
is pressed, the input
for the inset changes in the following
order.
2
When the inset is displayed, the channel number for INSET is
changed by pressing
CH
/
CH
.
Channel Selection of Inset Screen
Channel number for
inset screen
AV1 (or COMPONENT) AV2
TV programme
TV/TEXT
PIP
ON/OFF TV/VIDEO
SURROUND CH SCAN
NORMAL
CH
CH
MENU
B A C D
MOVE
PIP.TV/VIDEO
FREEZE
SWAP
1 2 3
4 5 6
7 8
0
9
PIP.TV/VIDEO
MOVE
SWAP
FREEZE
PIP ON/OFF
CH
CH
1
Press
PIP ON/OFF
.
• The inset is displayed.
2
Press
MOVE
to move the inset
position as shown on the right.
MOVE
1
When the inset is displayed, it is changed over with the main
screen by pressing
SWAP
.
2
The inset displays a still picture when
FREEZE
is pressed.
• Pressing
SWAP
when FREEZE is activated will cancels FREEZE and the
inset changes over with the main screen.
• Press
FREEZE
again to cancel the FREEZE mode.
SWAP/FREEZE
• The same TV channel screen will be displayed for main screen and inset screen, if the selection
channel of main screen and inset screen are TV channel.
• Even if the COMPONENT terminal is connected, the inset screen do not shows COMPONENT signal.
• When the colour system between the main screen and the inset is different, the size (aspect ratio) of
the inset screen might be bigger or smaller.
Useful features
21H-S3P[07-13]EN 5/11/04, 10:06 AM 13