background image

E 4

D i m e n s i o n :   1 7 6   x   2 5 0   m m

P r i n t e l l i g e n c e   ( M )   S d n .  B h d

Safety precautions

Damage

Turn off the power and unplug the power cord from the wall
outlet immediately if the TV set begins to make any unusual
noises or gives off smoke or an unusual smell. Then call your
dealer for service.

Servicing

To reduce the risk of electric shock, do not remove the back of
the cabinet. This TV set contains dangerous voltage.

Unstable surface and shocks

Do not place this TV set on an unstable cart, stand, shelf, or
table. The TV set may fall, causing serious injury to a child or
adult, and serious damage to the set.
Sharp recommends securing the TV set to a stable surface or
wall to prevent the set from falling due to sudden shocks or
impact.

Water

To prevent fire or electrical shock, do not place the TV set near a
bathroom, swimming pool or other area where it may become wet.

Moisture

To prevent electrical shock, do not use the TV set in an
excessively damp place.

Power-cord protection

To prevent electrical shock, do not subject the AC power cord to
damage by bending or twisting it, or by placing heavy items on
top of it and do not place the AC power cord under the TV set. If
the AC power cord becomes damaged, unplug it from the wall
outlet immediately and call your dealer for service.

21H-S3P[01-06]EN

21/10/04, 4:17 PM

4

Summary of Contents for 21H-S3P








































Reviews: