‰
15
Dimension: 176 x 250mm
Printelligence Sdn. Bhd. (Malaysia)
Timers (continued)
ON Timer:
Automatically turns power on after the set length of time has passed.
• To cancel the On Timer, press the
NORMAL
button during the On Timer mode.
• The minute setting of the timer is in 10-minute units.
• Always use the
STANDBY/ON
(
ø
) button on the remote control to turn off the power. The On Timer setting is
cancelled if power is turned off using the
POWER
switch on the TV set.
• The Off Timer is automatically set to turn the TV set off in 2 hours, if the TV set is turned on by the On Timer. To
cancel the Off Timer, press the
NORMAL
button during the Off Timer mode.
• The picture which appears on the screen, having been turned ON by the On Timer, is set at the channel and
volume prior to Standby mode.
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
H
Setting the On Timer
!
Press the
TIMER
button 3
times and the ON display
appears.
@
Press the
VOLUME UP
(
) or
DOWN
( ) button to set the
time. (Maximum time that can
be preset is 12 hours and 50
minutes.) In this state, the
Timer starts to count down.
#
When you have finished setting
the time, press the
TIMER
button. The on-screen display
will disappear and the Timer
function is turned on.
$
Press the
STANDBY/ON
(
ø
)
button to put the TV set into
Standby mode. (POWER
indicator will flash to indicate
On Timer is set.)
When the preset length of time
(in the above example, 9 hours
and 20 minutes) has passed,
the power turns on and a
picture appears on the screen.
TV/VIDEO
TV
0
NORMAL
TIMER
FUNCTION
SYSTEM
PICTURE
1
4
7
2
5
8
3
6
9
CH
CH
@
$
!
,
#
(TV set)
POWER indicator (Flashing)
PAL
B/G
39
21D2-SS[11-15]EN
30/10/04, 10:41 AM
15
