Sharp 1045 series, Online Manual

Page: 4 / 37

INDEX
CONTENTS
2
2
The flow chart shown below provides printing overview.
Reference: For more information on printing, see Basic Printing .
* The multi-bypass tray can be used on the 1457/1555, and the single bypass can be used on
the 1045/1217/1255/1456. For the procedures for loading paper in each type of tray, see
"LOADING PAPER" in the Operation Manual.
Caution
! When the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting
printing.
! Ensure printing has been completed before turning the power off. Do not remove the power cord before turning
the unit off.
When printing from paper tray or multi-bypass tray* When printing from single bypass*
Prepare the document you intend to print
Send print data from your computer
Printing
Exit printing
Load a single sheet of paper into the single bypass
Reference:
For more detail, refer to the "BYPASS FEED (including special paper)" in
the Operation Manual.
Open the printer driver setup screen and set the print preferences
Reference:
Printer Driver Settings , Printing a Watermark , Fitting the Printed Image to the Paper ,
Printing Multiple Pages on One Page , Two-sided Printing (1555 only)
Printing Overview