420 774 335 397 www.sharks-shop.cz
Stránka 25
According to the applicable product liability laws, the manufacturer of the device does not assume
liability for damages to the product or damages caused by the product that occurs due to:
● Improper handling
● Non-compliance of the operating instructions
● Repairs by third parties, not by authorized service technicians
● Installation and replacement of non-original spare parts
● Application other than specified
● A breakdown of the electrical system.
UNPACKING
● Open the packaging and remove the device carefully.
● Check that the delivery is complete.
● Check the device and accessory parts for transport damage. If the compressor is damaged or
incomplete contact service Sharks.
Attention!
The device and packaging materials are not toys! Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swallowing and suffocation!
INTENDED USE
The compressor is designed to generate compressed air for compressed-air driven tools which can be
driven with an air volume of up to aprox. 180l/miin (e.g. tire infator, blow-out pistol and paint spray
gun). Due to the limited air output it is not possible to use the compressor to drive tools with very high
air consumption (for example orbital sanders, rod grinders and hammer screwdrivers).
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manudactirer will be liable for any damage or unjuries of any
kind caused as a resulr of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
SAFETY INFORMATION
Attention!
The following basic safety actions must be taken when using this compressorin order to
protect the user from electric shocks and the risk of injury and fire. Read and follow these instructions
before using the equipment.
SAFE WORK
1. Keep the work area
● Disorder in the work area can lead to accidents.
2. Take environmental influences into accunt
● Do not expose electric tools to rain.
● Do not use electric tools in a damp or wet environment. There is a risk of electric shock!
● Make sure that the work area is well-illuminated.
● Do not use electric tools whre there is a risk of fire or ecplosion.
3. Protect yourself from electric shock
● Avoid physical contact with earthed parts (e.g. pipes, radiators, electric ranges, cooling units).
4. Keep children away
● Do not allow other persons to touch the equipment or cable, keep them away from your work area.
5. Securely store unused electric tools
● Unused electric tools should be stored in a dry, elevated or closed location out of the reach of
children.
6. Do not overload your electric tool
● They work better and more safely in the specified output range.
7. Wear suitable clothing
● Do not weat wide clothing or hewellery, which can become entangled in moving parts.
