SHARKS SH 685, Instruction For Operation And Maintenance

Page: 36 / 98

servis@sharks-cz.cz www.sharks-shop.cz Stránka 36
Dear customer,
Thank you for purchasing the Sharks SH 685 model Li-Ion. Your new saw was developed to meet the
demands of high standards, operational reliability, ease of operation and user safety.
With proper care, it will provide you with stable and reliable performance. If you use it properly and
only for the purpose of hobby use, you will enjoy years of safe operation.
NOTICE
Before using your new SHARKS product, read this Owner's Manual carefully.
Pay special attention to all WARNINGS and WARNINGS. Producer: see in EC
declaration of conformity
Your SHARKS product has many features to make your work easier and
faster. When developing this product, great attention has been paid to safety,
operation and reliability, with a view to simple maintenance and operation.
WARNING! Read all the instructions in this manual carefully.
Failure to follow the instructions may result in electric short circuit, fire or serious injury.
The manufacturer or the supplier is not responsible for any damages and injuries resulting
from use of the tool in a way that is inconsistent with the purpose of its use and with the safety
regulations and instructions in this manual. Using the tool in contravention of the purpose of its use
also results in the loss of the user's warranty rights.
1) Work area safety
● Keep work area clean and well lit. Cluttered or dark areas invite accidents.
● Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
● Do not drill, fasten or break into existing walls or other blind areas where electrical wiring may exist.
If this situation is unavoidable, disconnect all fuses or circuit breakers feeding this work site.
●
Use a detector to localize matallic and power line. If you have doubts contact qualified electrician or
your network operator.
2) Electrical safety
●
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
● Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
● Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
● Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
● When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
● If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter
protected supply. Use of a ground fault circuit interrupter reduces the risk of electric shock.
3) Personal safety
●
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
●
Avoid the use of tools children, people with mental and physical disabilities or persons who are not
taking this tool knowledge, unless they have adequate supervision responsible for their safety.
● Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.