420 774 335 397 www.sharks-shop.cz Stránka 45
Using AC
Before plugging an appliance or power cord to the generator:
- Make sure the appliance is in good operating condition. Faulty equipment or cable may cause
potential electrical shock.
- If the appliance begins to operate abnormally, becomes slow or stops suddenly, turn it off
immediately. Unplug the appliance and determine whether the problem is with the device or, if not
exceeded the relative load capacity.
- Make sure that the electrical load on the tool or device did not exceed the generator. Never exceed
the maximum current ratio generator. The level of current between the proportional and the maximum
may be exceeded max. 5 minutes.
NOTE:
Severe overloading will open the circuit breaker. Cant time limit for maximum current load or slow
overloading the generator may not switch off the circuit breaker. But it will shorten the life of the
generator.
Limit operation requiring maximum current - max. 5 min.
STOPPING THE ENGINE
Turn off the alternating current circuit breaker.
Turn off the switch of engine.
Turn off valve.
Notice: If you want to stop engine emergently. please turn the switch of engine to "OFF"
position.
