GETTING STARTED
User manual:
Read this manual before started compilation tent. Important informations and
useful recommendations facilitate compilation.
Instructions for compilation:
All instructions are in this manual and contain all informations
to build your model. Read all instructions before started compilations and during assemly.
Parts and Parts list:
Check whether you have all necessary parts. Divide content package
by numbers parts. Become acquainted with technical equpment and connecting materials for
a easier assembly.
PROCEDURE PLAN
Track the weather:
Place to build must be
dry and without wind. Do not build in windy
weather. Do not place on the wet or oozy fundation.
Cooperation:
Need is have minimal two persons for a compilation tent. The first person
positioning with parts and second person manipulate with connecting parts and tools.
Tools and materials:
You will need a few basic materials to build your tent. Decide which
use the method consolidate and kind substructure(base).
CARE AND MAINTENANCE
Finishing:
Clean the surface with lukewarm water and a little soap for a service life. Then
allow to dry ( It is best in the shadow – prevention before fading colours).
Roof:
Keep the roof clear of leaves and snow with the help a soft broom with long handle.
The leaves soaked in water and snow can damaged the roof.
Other recommendations:
Do not save chemicals for swimming pool, flammable and
corrosive sunstances in this tent. These substances must be stored in approved airtight
containers. Do not use to cleaning tent acid, alkaline solvents, aggressive cleaning agents,
hard brushers or steam cleaners - may be damaged this product - on this damage is not
covered by warrantly!
Do not leave tent unattended. In bad weather the tent save on dry and good ventilated place(a
tent must be dry).
PARTS LIST
420 774 335 397 www.sharks-shop.cz Stránka 14
