H
F
J
D
D
F
Image 1
Image 2
Firmly grab one end of
Frame Pole ( H )
, arc
Frame Pole ( H )
(Image 1) and insert
Corner Pin (G)
into hollow end of
Frame
Pole ( H )
( Image 2 & 3). Do this for all four
Frame Poles ( H )
. Hitting net is now assembled and can be stood upright (Image 4).
Please refer to Titan Hitting Net images on the front of instructions, above the “KEY” for reference on how hitting net should look
standing upright.
To disassemble Hitting Net, reverse
steps 6 through 1.
Uninstall
Hitting Target (A)
and fold in
order to fit into
Carry Case (M)
. Remove
all
Metal Stakes (J)
from ground.
Remove all
Corner Pins (H)
from
Frame Poles ( H )
.
Remove
Frame Poles ( H )
from
Pole
Sleeves (C).
Disassemble shock corded
Frame Poles ( H )
.
Fold hitting net up and roll as tight as
possible in order to fit in
Carry Case (K)
.
Place Hitting Net into
Carry Case (K)
.
Add
Frame Poles ( H )
to
Carry Case (K)
.
Last Add
Metal Stakes (J)
and
Hitting
Target (A)
to
Carry Case (K)
.
To secure net to ground push
Metal Stakes (J)
firmly through
Anchor Stake
Loops (E)
into ground. In order to add extra stability to hitting net, untie
Anchor
Stake Draw String (F)
. Pull opposite end of
Anchor Stake Draw String (F)
that
has plastic piece attached, at a 45 degree angle away from the hitting net until
draw string is tight (Image 1). Insert
Metal Stake (J)
through loop of string that is
threaded through plastic piece of
Anchor Stake Draw String (F)
(Image 2).
Push
Metal Stake (J)
firmly into ground at a 45 degree angle away from hitting
net (Image 2). To adjust
Anchor Stake Draw String (F)
length pull plastic piece
attached to
Anchor Stake Draw String (F)
toward or away from hitting net.
1.
2.
3.
4.
5.
6.
7.
To install the
Hitting Target (A)
, thread one end of the string attached to the
target through the
Target Grommets (D)
(Image 1 & 2). Then thread the end
back through the cord lock, by squeezing the lock between your thumb and
forefinger to open the string hole shown shown with the orange arrows above
(Image 2). Adjust accordingly for desired target height (Image 3).
step 4
step 5
step 6
SET UP INSTRUCTIONS
(continued)
H
H
G
G
H
G
Image 2
Image 3
E
Image 3
Image 2
Image 1
D
D
A
FOR MORE INFORMATION PLEASE VISIT WWW.callawaytag.COM OR CALL 1-800-456-2129
STORAGE INSTRUCTIONS
K
Image 1
Image 4
E
G
E