SHARKS Li-Ion SH 5502, Instruction For Operation And Maintenance

Page: 36 / 97

420 774 335 397 www.sharks-shop.cz Stránka 36
off. Switching tools with your finger on the switch or connecting the power tool to the power supply with
the control switch on, are the source of accidents.
● Keep tools clean and dry (especially handle) without oil, grease and other greases.
● Before removing the electrical device, remove any tools or keys from its reach. The tools or keys left
attached to the rotating parts of the tool will result in personal injury.
●
Do not bend. Always maintain a correct and steady attitude. This allows for better control of power
tools in unexpected situations.
● Dress properly. Do not wear loose clothing or jewelery. Keep your hair, clothing and gloves away
from the moving parts of the device. Free clothing, jewelry, or long hair can be captured by moving
parts.
4) Use and care of power tools
● Do not push the tool. Use the correct power tool for your use. An appropriate power tool will make
work better and safer in the range for which it was designed.
● If the switch does not work, it means it does not switch on and / or turn off, do not use the device.
Any power tools that can not be operated by the switch are dangerous and must be repaired.
● Disconnect the device from the power supply before performing adjustments, replacing accessories,
or storing power tools. Such preventive measures reduce the risk of accidental start-up.
● Keep electrical tools away from children and do not allow persons to use electrical power tools or
these instructions to use this power tool. Power tools are in the hands of unskilled people dangerous.
● Maintain power tools. Check for incorrect connection of the parts of the drive, damage to parts or
other conditions that may affect the operation of the power tool. If it is damaged, have the power tool
serviced before use. Many accidents are caused by poorly maintained power tools.
● Always hold the tool behind the insulated handle. When performing operations, there is a possibility
of contact with a hidden lead, which can lead to an electric shock through the conductive parts of the
tool.
● Use power tools, accessories, blades, etc. in accordance with these instructions and in the manner
intended for the type of power tool, taking into account working conditions and work carried out. Using
power tools for work other than intended could result in a hazardous situation.
5) Use and Care of Battery Tools
● Charge the battery only with the original charger included in the package. A charger that is suitable
for one type of battery pack may cause a risk when used for another battery pack.
●
Only use the battery charger in the 230 V approved power supply.
●
Protect the battery from shocks, frosts, sun, moisture and never try to open it!
● If the battery charger is not used, keep it away from other metallic objects, lugs, small coins, keys,
nails, screws or other small metallic objects that may cause the two battery contacts to be connected.
Bridging (shorting) of battery contacts can cause burns or fire.
● When handling roughly, liquid may spill out of the battery. Avoid contact with this liquid. If accidental
contact occurs, rinse the affected area with water. If the fluid gets worse, seek medical attention.
Battery fluid can cause irritation or burns.
●
Never immerse the tool or charger in water or other liquids
● Protect the battery and charger from moisture. Do not use the charger outside in unfavorable
weather conditions.
● Avoid falling batteries and chargers, or putting pressure or any other form of mechanical stress.
●
Use a cordless lawn shear at an ambient temperature of 0 to 40°C if it is not in use in a dry and safe
place at 10 to 30°C. Do not expose the lawn and battery lasers to direct sunlight.