550 mm
550 mm
550 mm
550 mm
550 mm
550 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
550 mm
550 mm
550 mm
550 mm
550 mm
550 mm
550 mm
WPC
6
4.2 Cable Diagram WPC450/550
5. Installation
If installing into an empty PC case, please continue to section 5.1. If a power supply is already installed,
remove it first from the case.
To do so, proceed as follows:
1. Turn off your PC. Disconnect the power cord from the wall outlet and your power supply.
2. Open the PC case. For additional information, refer to the manual of the PC case.
3. Disconnect all cables between the power supply and the other PC components (e.g. mainboard, HDDs,
drives, fans, etc.).
4. Remove the mounting screws connecting the power supply to the PC case and then carefully remove the
power supply from the case.
5.1 Installing a Power Supply into a PC Case
1. Insert the power supply into the PC case and place it against the power supply bracket on the rear panel. For
additional information, refer to the manual of the PC case.
2. Attach the power supply from the outside of the case using the provided screws. Ensure that the fan and air
vents of the built-in power supply are not covered.
1x 20+4-Pin
Mainboard Connector
1x 20+4-Pin
Mainboard-Connector
1x 4+4-Pin
CPU Connector
1x 4+4-Pin
CPU Connector
2x 6+2-Pin
PCIe Connectors
4x 6+2-Pin
PCIe Connectors
5x SATA Connectors
6x SATA Connectors
2x IDE Connectors
2x IDE Connectors
1x Floppy Connector
1x Floppy Connector
4.3 Cable Diagram WPC650/750
Summary of Contents for WPC Bronze Series
Page 1: ...Manual...
