scorpio 1000/2000
6. Connect the circuit board’s SATA data connector to a matching
SATA data connector on the mainboard (fig. 8).
fig. 8
5.2 3.5" HDD cage
1. Attach the mounting rails to the 3.5“ HDD from both sides (fig. 9).
fig. 9
4. Screw the HDD to the mounting frame from below (fig. 7).
(Screws with coarse thread for HDD mounting)
fig. 7
5. Slide the mounting frame back into the Fast Swap bay until its
detent lever locks and close the bezel.
Summary of Contents for SCORPIO 1000
Page 1: ...Manual...
