manualshive.com logo in svg

Shark SSD-603567E, Operator'S Manual, Page: 8 / 42

Share
Download
Shark SSD-603567E Operator'S Manual Download Page 8

 SSD •  9.801-194.0  •   Rev.  12/13

OPERA

TOR’S MANU

AL

  

PRESSURE 

W

ASHER  

8

98011940-10

98011940-15

98011940-13

98011940-12

98011940-11

ASSEMBLY INSTRUCTIONS

STEP 1:

 Attach the high pressure 

hose to the spray gun using teflon 
tape on hose threads.

STEP 3:

 Remove shipping cap and 

install oil dipstick. Check pump oil 
level by using dipstick or observe 
oil level in oil window (if equipped).  
Use 30 wt. non detergent oil.

STEP 6:

 Connect the garden hose 

to pump water inlet.  Inspect inlets.

 

CAUTION: Do not run the pump 
without water or pump damage 
will result.

STEP 2:

 Pull the spring-loaded  

collar of the wand coupler back to in-
sert your choice of pressure nozzle.

Safety 

Latch

Spray 

Gun

High 

Pressure 

Hose

Wand

Pressure

Nozzle

Dipstick

Water

Inlet

Pump 

Discharge 

Fitting

STEP 4:

 Connect the high pressure 

hose to the pump discharge fitting. 
Push coupler collar forward until 
secure.

STEP 5:

 Connect garden hose to 

cold water source and turn water on 
completely. 

Never use hot water.

Garden 

Hose

98011940-14

Summary of Contents for SSD-603567E











































Reviews:

No comments