manualshive.com logo in svg

Shark SSD-603567E, Operator'S Manual, Page: 14 / 42

Share
Download
Shark SSD-603567E Operator'S Manual Download Page 14

 SSD •  9.801-194.0  •   Rev.  12/13

OPERA

TOR’S MANU

AL

  

PRESSURE 

W

ASHER  

14

Air Shutter 

Locking Screw

Air Shutter 

Locking Screw

Air Band Locking 

Screw

Air Shutter

Air Band

Reference Numbers

Air Band Locking Screws

Air Band

MAINTENANCE AND SERVICE

To adjust

, start the machine and turn burner ON. 

Loosen two locking screws found in the air shutter 
openings (see illustration) and close air shutter until 
black smoke appears from burner exhaust vent. Note 
air band position. Next, slowly open the air shutter until 
white smoke just starts to appear. Turn air shutter half-
way back to the black smoke position previously noted. 
Tighten locking screws.
If the desired position cannot be obtained using only 
the air shutter, lock the air shutter in as close a position 
as can be obtained, then repeat the above procedure 
on the air band setting.

Shark Clear Flame Oil Burner

Burner Air Adjustment

: The oil burner on this machine 

is preset for operation at altitudes below 1000 feet. If 
operated at higher altitudes, it may be necessary to 
adjust the air band for a #1 or #2 smoke spot on the 
Bacharach scale.
To adjust, start machine and turn burner ON. Loosen 
two locking screws found on the air band and close air 
band until black smoke appears from burner exhaust 
vent. Note air band position. Next, slowly open the air 
band until white smoke just starts to appear. Turn air 
band halfway back to the previously noted position. 
Tighten locking screws.

Clear Flame Burner Air Adjustment

CAUTION:

 If white smoke appears from burner ex-

haust vent during start-up or operation, discontinue 
use and readjust air bands.

NOTE:

 If a flue is installed, have a professional service-

man adjust your burner for a #1 or #2 smoke spot on 
the Bacharach scale.

Summary of Contents for SSD-603567E











































Reviews:

No comments