Shark SGP-3020, Operator'S Manual, Page: 9 / 42

Shark SGP • 97-6132 • REV. 4/07
9
PRESSURE
W
ASHER
OPERA
TOR’S MANU
AL
Safety
Latch
OPERATING INSTRUCTIONS
STEP 7:
Turn the engine to "Run" position.
STEP 8:
Pull the starter grip. If the engine fails to
start after 2 pulls, squeeze the Trigger gun to release
pressure and repeat step. Return starter gently. After
the engine warms up enough to run smoothly, move
choke to run position and throttle to fast position.
CAUTION: Small engines may kick back. Do not
hold pull starter grip tightly in hand.
WARNING! Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
The four color-coded quick con-
nect nozzles provide a wide array
of spray widths from 0° to 45° and
are easily accessible when placed
in the convenient rubber nozzle
holder, which is provided on the
front of the machine.
N
OTE: For a more gentle rinse,
select the white 40° or green 25°
nozzle. To scour the surface, select
the yellow 15° or red 0° nozzle. To
apply detergent select the black
nozzle.
NOzzLES
Throttle
burner
Switch
STEP 8: Hot water is required. Turn
on burner switch to begin heating
water.
Selection of high or low pressure is accompanied by turning the handle.
Note:
High pressure nozzle must be inserted at end of wand to obtain
high pressure. To apply soap read operator's manual.
variable Pressure
Control handle
Trigger
variable Pressure
Wand (vP)
high
Pressure
Nozzle