background image

4

AUS sharkclean .com . au   NZ sharkclean .co. nz

15 

DO NOT

 pull or carry by cord, use 

cord as a handle, close a door on 

cord or pull cord around sharp edges 

or corners. 

DO NOT

 run Steam and 

Scrub Mop over cord. Keep cord away 

from heated surfaces.

16

 

DO NOT 

unplug by pulling on power 

cord. To unplug, grasp the plug and 

pull out of the plug socket. 

DO NOT 

use extension cords or sockets with 

inadequate current-carrying capacity.

17

 

DO NOT

 put any objects into the 

steam nozzle openings. Discontinue 

use if the steam nozzle is blocked.

18 

DO NOT

 put hands or feet under the 

Steam and Scrub Mop as it gets  

very hot.

19

  Use the Steam and Scrub Mop 

ONLY

 

on flat, horizontal surfaces. 

DO NOT

 

use on walls, counters or windows.

20 

DO NOT

 use on leather, wax-polished 

furniture, synthetic fabrics, velvet 

or other delicate, steam-sensitive 

materials.

21

 

DO NOT

 add cleaning solutions, 

vinegar, scented perfumes, oils or any 

other chemicals to the water used in 

the Steam and Scrub Mop. This may 

damage the mop or make it unsafe for 

use. If you live in a hard-water area, 

we recommend using distilled water in 

your Steam and Scrub Mop.

22

 

NEVER

 store or leave Steam and 

Scrub Mop in one spot with Dirt Grip™ 

pad attached, as this may damage 

surfaces.

23

 Before removing Dirt Grip™ or Dusting 

pads, unplug the Steam and Scrub 

Mop and allow it to cool.

24 

Unplug the Steam and Scrub Mop 

before cleaning. Use a dry or damp 

cloth to clean the exterior. 

DO NOT

 

pour water on Steam and Scrub 

Mop or use alcohol, benzene or paint 

thinner to clean.

25 

Extreme caution should be exercised 

when using the Steam and Scrub Mop 

to clean stairs.

26 

NEVER

 use Steam and Scrub Mop 

without the Dirt Grip™ or Dusting pads 

pad attached.

27 

Keep your work area well lit.

28 

Store Steam and Scrub Mop indoors in 

a cool, dry place.

29 

To avoid circuit overload,

 DO NOT 

operate another appliance on the 

same socket (circuit) as the  

Steam and Scrub Mop.

30 

To avoid scalding injuries, 

ALWAYS

 

unplug the Steam and Scrub Mop and 

allow it to cool before removing or 

changing mop heads, accessories or 

Dirt Grip™ pads.

31

  Your Steam and Scrub Mop is 

designed to clean hard floor surfaces 

that will withstand high heat. 

DO NOT 

use on unsealed wood or unglazed 

ceramic floors. On surfaces that 

have been treated with wax and on 

some no-wax floors, the sheen may 

be removed by the heat and steam 

action. We recommend that you check 

the use and care instructions from the 

floor manufacturer before using your 

Steam and Scrub mop. Do not operate 

the appliance if it is leaking.

SAVE THESE INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE

Summary of Contents for S7001ANZ Series

















Reviews: