11
12
FREEPHONE 0800 862 0453
www.sharkclean.eu
5
Use the shaggy side of the cleaning pockets
(P129W) to lift up and lock away all the dirt and
debris and the scrubbing side to break up the tough
stains.
(fig. 12)
6
When the water tank is empty, the Steam Mop will
stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from
the outlet. Follow the instructions from page 7. This
applies to switching the mop heads or cleaning
pockets as well.
NOTE:
Please wait 2-3 minutes for the Steam Mop
to cool off before switching the mop head or the
cleaning pocket. Never leave the Steam Mop with a
damp/wet cleaning pocket on any floor.
Using Your Steam Mop - cont’d
Using Your Carpet Glider
THE CARPET GLIDER
1
The Carpet Glider can be used with the All-Purpose
Head to lightly steam your carpet and area rugs. Just
place the mop head with cleaning pocket attached
into the glider. The recommended steam setting is
SCRUB
when using the Carpet Glider.
(fig. 13)
2
Move the Steam Mop back and forth across a
section of the carpet.
(fig. 14)
The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
fig. 12
fig. 13
fig. 14
Your Shark
®
Lift-Away
™
Pro Steam Pocket
®
Mop is
designed to clean surfaces that will withstand high heat
and moisture. Do not use on unsealed wood surfaces
(especially wooden antique furniture), unglazed ceramic
tile, painted surfaces or surfaces that have been treated
with wax, oils, varnishes, or shellac. The sheen may be
removed by the heat, steam, and friction of the cleaning
tools. Lacquer and polyurethane coatings provide a hard
durable protective finish that withstands moisture, but it
is always recommended to test an isolated area of the
surface to be cleaned before proceeding.
We also recommend you check the use and care
instructions from the surface manufacturer.
When cleaning finished wood surfaces, use broad,
continuous cleaning strokes. To prevent surface damage,
avoid focusing steam or allowing the cleaning tools to sit
in one spot for any amount of time.
Using Your Handheld Steamer
1
To remove the Handheld Steamer, press and hold
down the Handheld Release Buttons while pulling
out the Handheld Steamer.
(fig. 15)
fig. 15