15
16
FREEPHONE 0800 862 0453
www.sharkclean.eu
CAUTION:
Always avoid any sudden changes
in temperature to prevent breakage of cracks in
windows.
1
Attach the Window Squeegee by snapping into the
handle of the Accessory Hose.
(fig. 21)
2
Select either
DUST
,
MOP
or
SCRUB
mode by
pressing the
ON/STEAM SETTING
button and wait
until the selected setting indicator light turns solid
blue. Hold down the steam trigger to start steaming.
(fig. 22)
Cleaning Tip:
To use the window squeegee, work with the vapour jet down using top to bottom movements. To do
this without leaving streaks, use lateral movements from the top to the bottom of the surface.
Using Your Removable Handheld Steamer with Window Squeegee
fig. 21
fig. 22
3
To remove the Window Squeegee, press and hold
down the Accessory release button. Then slide out
the Window Squeegee.
CAUTION:
Do not press the steam trigger while
attaching or removing the Window Squeegee.
Using Your Removable Handheld Steamer with Flat Scrubber
Cleaning Tip:
The Flat Scrubber is designed for cleaning a variety of surfaces and is exceptional on those that are
large and flat including counter tops, table tops, walls mirrors, windows, stairs, shelves and other similar surfaces.
Super absorbent micro-fibre bonnet loosens, lifts, and locks in dirt and grime while sanitizing at the same time.
4
To remove the Flat Scrubber Tool, press and hold
down the Accessory Hose release button. Then slide
out the Flat Scrubber Tool.
(fig. 25)
CAUTION:
Do not press the steam trigger while
attaching or removing the Flat Scrubber Tool.
CAUTION:
Do not use the Flat Scrubber Tool without
the All-Purpose Scrubber Pad attached.
fig. 23
fig. 24
fig. 25
1
To attach the All-Purpose Scrubber Pad, place the
pad exterior side down on a flat surface (lavender
tab indicates the bottom of the pad) and insert the
top of the Flat Scrubber Tool into the top portion of
the pad and then pull the pad over each side of the
back edge.
2
Press the Flat Scrubber Tool onto the Accessory
Hose until it clicks into place.
(fig. 23)
3
Select either
DUST
,
MOP
or
SCRUB
mode by
pressing the
ON/STEAM SETTING
button and wait
until the selected setting indicator light turns solid
blue. Hold down the steam trigger to start steaming.
(fig. 24)
