11
www.lakeland.co.uk
5
When one side of the cleaning pocket gets dirty,
just flip the mop and you can quickly start using the
other side.
(fig. 12)
6
When the water tank is empty, the Steam Mop will
stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from
the outlet. Follow the instructions from page 7. This
applies to switching the mop heads or cleaning
pockets as well.
NOTE:
Please wait 2-3 minutes for the Steam Mop
to cool off before switching the mop head or the
cleaning pocket. Never leave the Steam Mop with a
damp/wet cleaning pocket on any floor.
Using Your Carpet Glider
THE CARPET GLIDER
1
The Carpet Glider can be used with the All-Purpose
Head to lightly steam your carpet and area rugs. Just
place the mop head with cleaning pocket attached
into the glider. The recommended steam setting is
SCRUB
when using the Carpet Glider.
(fig. 13)
2
Move the Steam Mop back and forth across a
section of the carpet.
(fig. 14)
The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
fig. 13
fig. 14
Using Your Steam Mop - cont’d
fig. 12