sharkclean .com
sharkclean .com
Clean off any debris on the bristles.
Using a coin, turn locks counterclockwise, then open the cover to access
Brushroll
.
NOTE:
Cover hinges open but is not completely removable.
If you vacuum up a
hard or sharp
object, or
notice a noise change while vacuuming, remove
any blockages or objects caught behind the
brushroll.
Clear away any dust, dirt, or blockages in
Debris Intake.
To close the cover, push down until it clicks into
place, then close the locks with a coin.
DEBRIS WRAPPED AROUND BRUSHROLL
DEBRIS INTAKE
MAINTENANCE
CHECKING FOR BLOCKAGES
NOTE:
If any hair is wrapped around the brushroll,
extending cleaning time will allow the self-cleaning
brushroll to remove it for you. If some hair wrap remains
after continued use, carefully remove it from the brushroll.
Detach wand from floor nozzle and handle, and
check both ends for blockages.
Detach floor nozzle from wand and vacuum pod,
tilt nozzle neck back, and check opening for
blockages.
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
Detach dust cup from vacuum pod. Empty dust
cup, remove debris from lint screen, and check for
blockages.
WAND BLOCKAGES
NOZZLE BLOCKAGES
HANDLE/HOSE BLOCKAGES
DUST CUP BLOCKAGES
CLEANING THE BRUSHROLL
Self-Cleaning Brushroll
The self-cleaning brushroll actively removes hair wrap as you vacuum. If any hair is
wrapped around the brushroll, continue vacuuming. This will allow the self-cleaning
brushroll to remove the hair wrap and send it to the dust cup. If some hair wrap
remains after continued use, remove the cover from the bottom of the nozzle and
carefully clean off the brushroll.
