12
TOLL FREE: 1-800-396-9208
13
www.sharkclean.com
English
3
Lint Brush Frame –
use to
remove hair, lint and pet fur
while steaming your garments.
1
Small Steam Bonnet –
must
be in place over steam nozzle
during all usage.
TIP
: Provides evenly distribution
of steam and protects fabrics
from watermarks and impurities
in water
4
Upholstery/Delicate Fabric
Frame & Delicate Steam
Bonnet –
provides extra
protection for delicate fabrics
when the Wrinkle Eraser
™
is
not necessary while freshening
fabrics.
Fabric Recommendations:
Silk, satin, embellished
garments.
TIP:
Some garments have
better results when steamed
from the inside or turned inside
out. Slightly tug the bottom
of the garment and hold at an
angle.
2
Bristle Brush Frame –
Offers
better steam penetration for
heavy fabrics without leaving
water marks.
Fabric Recommendations:
Heavy fabrics, cotton, wool,
canvas, denim.
CAUTION:
Do not use the
bristle brush on delicate fabrics.
When to use the different
accessories:
Using Your Press & Refresh
™
- cont.
Care of Your Press & Refresh
™
Troubleshooting Guide
Cleaning & storing
1
Turn the garment steamer off
“O”.
2
Unplug the appliance from the
electrical outlet.
3
Let the appliance cool
completely for approximately
30 minutes.
4
Empty the water from the
water tank.
5
Wipe the exterior of the
garment steamer with a damp
cloth and wipe dry if needed.
9
Hand wash the bonnet frame
in cold water with a mild
detergent and let air dry
completely before using again.
Do not dry in clothes dryer.
10
To re-attach the frame, gently
snap the frame over the steam
nozzle and press gently to lock
into place (
Fig. 1
).
PROBLEM
POSSIBLE REASONS
SOLUTIONS
There is no
steam.
The steamer is not turned on.
There is not enough
water in the unit.
Verify that the blue light on the unit is lit. If not,
check that the unit is plugged in and the on/off
button is raised and in the on “I” position.
Verify that the water tank is at least half way full
or fill to the max fill line.
The nozzle leaves
water drops on the
garment.
You are not using the steam
bonnet.
The steam bonnet is
too wet.
The frame has condensation.
The small steam bonnet frame must be in place
at all times during usage.
The bonnet prevents water drops being left on
the garment and to removes impurities from your
water.
Let the unit cool for 30 minutes, remove the
steam bonnet and let it dry out before using
again or replace with a new bonnet frame.
Let the appliance cool and wipe the frame off.
6
Bundle up the power cord and
secure it with the VELCRO
®
strap that is attached to the
power cord. Always store your
appliance in a cool, dry area.
Care & use of the small steam
bonnet frame
7
The steam bonnet is attached
to a frame and helps filter
impurities from your water.
It might become slightly
discolored over time.
8
Let the steamer cool completely
before removing. Gently pull on
either side of the frame and lift
off of the nozzle.
5
Upholstery/Delicate Fabric
Frame & Upholstery Steam
Bonnet –
shaggy material acts
like multiple fingers to pick
up dust and deodorize while
steaming. It provides a large
pocket of hot steam.
6
VELCRO
®
Clips –
Easy detachable clips can
be used to hold lightweight
garments directly on to the pad
and to position & stretch the
garment for quick steaming
with better results
7
Vertical Press Pad –
Creates a vertical ironing board
anywhere in the home. The
Vertical Press Pad can be used
on any door and is virtually
invisible when the door is closed
for easy access to the pad for
last minute touch ups.
Fig. 1
GS500CWN_11_IB_EF_100920.indd 12-13
20/09/10 9:37 AM
