15
sharkclean .co.uk
14
sharkclean .co.uk
CHECKING FOR BLOCKAGES
MAINTENANCE
Detach hose from vacuum pod, and check
opening on back of pod for blockages.
Detach wand from floor nozzle and handle,
and check both ends for blockages.
Detach wand from floor nozzle, tilt nozzle neck
back, and check opening for blockages.
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
Detach dust cup from vacuum pod. Empty dust
cup, remove debris from lint screen, and check for
blockages.
POD BLOCKAGES
WAND BLOCKAGES
NOZZLE BLOCKAGES
HANDLE/HOSE BLOCKAGES
DUST CUP BLOCKAGES
To keep your vacuum’s suction power optimal, follow these instructions. Make sure unit is off and cord unplugged.
1
Use a coin to unlock the 3 locks on the bottom
of the floor nozzle.
3
Remove any string, carpet fibres or hair that
may be wrapped around the brush-roll.
2
A portion of the base is removable to allow for
better access to the brush-roll and exposure to
the airway. Shine a torch from the bottom to
check for possible blockage in the airway.
4
To reassemble, replace base by lining it up along
the front of the nozzle. Push down to snap into
place. Lock the 3 locks.
STEP 1
STEP 3
STEP 2
STEP 4
CHECK FOR BLOCKAGES
NOTE:
Scissors and torch not included
