AU
02 8 8 01 76 6 6
NZ
0 8 0 0 112 6 60
AU
sharkclean .com . au
NZ
sharkclean .co. nz
Select surface setting:
O Power Off
I Hard Floor
For hard floors, small area rugs or
delicate carpets. The brushroll will spin at
a slower speed.
II
Carpet
The brushroll will spin faster for cleaning
carpets.
NOTE:
All accessories are compatible with both the wand and the handle. Included accessories
will vary by model.
NOTE:
Brushroll
will continue to spin in all modes.
CLEANING MODES
To engage
brushroll
, step on floor nozzle and
tilt handle back firmly.
Step on the pedal on the floor nozzle to lift
off the pod.
When finished cleaning in Lift-Away mode,
reattach the pod by sliding it onto the floor
nozzle post until it clicks into place.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as intended.
Solid Red:
There is a jam in the brushroll area. Turn off and unplug the vacuum and remove any
blockages in the nozzle.
Flashing Red:
The motorised floor nozzle is overheating. Turn the vacuum off and wait a
minimum of 60 minutes for the unit to cool down.
Press the
Wand Release
button and pull up on
the wand to detach it from the pod.
Press the
Handle Release
button and pull up on
the handle to detach it from the wand.
Attach an optional cleaning accessory to
handle or wand.
UPRIGHT MODE
LIFT AWAY MODE
POWER/SURFACE SWITCH
INDICATOR LIGHT
ACCESSORIES—WAND
ACCESSORIES—HANDLE
SETTINGS
BRUSHROLL INDICATOR LIGHT
ABOVE-FLOOR—WAND
ABOVE-FLOOR—HANDLE
Wand
Release
The
Suction Control Slider
located on the
handle allows you to adjust the suction
depending on the floor type.
MIN:
to reduce suction and increase
maneuverability on carpets.
MAX:
to increase suction on hard floors.
SUCTION CONTROL
