background image

2

WHEN USING AN ELECTRICAL 
APPLIANCE, BASIC SAFETY PRECAUTIONS 
SHOULD ALWAYS BE OBSERVED, 
INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING 
YOUR SHARK

®

 NAVIGATOR LIFT-AWAY. 

POLARIZED PLUG: 

To reduce the risk of electric shock, this appliance 
has a polarized plug (one blade is wider than the 
other).  As a safety feature, this plug will fit into 
a polarized outlet only one way.  If the plug does 
not fit fully into the outlet, reverse the plug.  If it 
still does not fit, contact a qualified electrician.  

DO NOT force into outlet or try to 
modify to fit.

WARNING:

 To reduce the risk of 

electric shock or injury, do not use 
outdoors or on wet surfaces.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC 
SHOCK OR INJURY:

GENERAL ELECTRICAL SAFETY:

1.    Unplug from electrical outlet when not in use 

and before servicing.

2.   

DO NOT

 use vacuum with a damaged cord or 

plug.  If appliance is not working as it should, 
has been dropped, damaged, left outdoors, 
or dropped into water, return it to EURO-PRO 
Operating LLC for examination, repair, or 
adjustment.

3.   

DO NOT

 pull or carry vacuum by the cord.

4.   

DO NOT

 unplug by pulling on cord; to unplug, 

grasp the plug, not the cord.

5.   

DO NOT 

handle plug or appliance with wet 

hands.

6.    

DO NOT

 run the vacuum over the power cord.

7.   

DO NOT

 use the cord as a handle.

8.   

DO

 

NOT

 close a door on the cord.

9.   

DO

 

NOT

 pull cord around sharp corners.  The 

use of an extension cord is not recommended.

10.  

DO

 

NOT

 leave appliance when plugged in.

11.   Keep cord away from heated surfaces.
12.   Turn off all controls before plugging or 

unplugging vacuum cleaner.

13.   Always turn off this appliance before connecting 

or disconnecting motorized nozzle.

14.  Store your appliance with the power cord 

secured around the two cord holders-as shown 
in the storage instructions.

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

NV350Q_26_IB_ENG_101019.indd   2

10-10-19   9:19 AM

Summary of Contents for NV350Q





















Reviews: