In Use: Lights illuminate steadily
Full
Charge
Full
Charge
Nearly
Full
Mid
Charge
Mid
Charge
Low
Charge
Low
Charge
Needs
Charge
Charging: One light flashes
TEMPERATURE ISSUE:
FIRST AND THIRD INDICATOR LIGHTS FLASHING ALTERNATELY
NOTE:
The battery must be charged before first use. A complete charge takes approximately 3.5 hours.
NOTE:
The indicator light will shut off 5 minutes after reaching full charge.
Charge Indicator
Light
TOP OF BATTERY
CHARGE INDICATOR LIGHTS
If the first and third indicator lights are flashing alternately, the battery
temperature is not optimal. If this happens when charging, leave the battery
plugged in and charging will resume once temperature reaches optimal level.
OPERATING THE VACUUM
OPERATING THE VACUUM
RUNTIMES
POD, HANDLE AND WAND ARE DETACHABLE
Press the
Wand Release
button
until it clicks, then pull up on wand
to detach from the floor nozzle.
DETACH THE WAND
Pull the
Handle Release
trigger to
detach the handle from the wand.
DETACH THE HANDLE
Press
LIFT-AWAY
button on
handle and lift pod off floor
nozzle.
DETACH THE POD
MODE AND SETTINGS
REGULAR
BOOST MODE
UPRIGHT & GET ANYWHERE
TECHNOLOGY (CARPET)
Up to 25 minutes
Up to 16 minutes
UPRIGHT & GET ANYWHERE
TECHNOLOGY (FLOOR)
Up to 29 minutes
Up to 15 minutes
ABOVE FLOOR & LIFT-AWAY
(WAND OR HANDLE)
Up to 50 minutes
Up to 15 minutes
TIP:
See next page for all the different
ways you can use your vacuum.
IMPORTANT:
Your unit will default to Max Power when using in Lift-Away mode.
Max Power shortens runtime
.
NOTE:
Select
Carpet
mode for stuck-on dust and debris.
Press icon to turn power
on or off.
Power
Press icon to select surface
setting:
Carpet
For carpets.
Floor
For hard floors and rugs.
Press icon to boost power:
BOOST
When in Lift-Away™
mode, press
BOOST
icon to turn on or off.
The default power setting
on floors and carpets is
ION Power mode. For
an additional boost of
suction power, press and
hold the
BOOST
icon.
POWER BUTTON
SURFACE
SUCTION LEVEL
SETTINGS
ENGLISH
43
s h a r kc l e a n . e u
42
s h a r kc l e a n . e u
