13
14
sharkclean .eu
0800 862 0453
WARNING:
To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing.
WARNING:
Hand wash
filters only with water
to prevent damage from
cleaning chemicals.
Allow ALL filters to air-
dry completely before
replacing them in the
vacuum to prevent liquid
from being drawn into
electric parts.
IMPORTANT:
Clean the
dust screen inside the dust
cup as required.
NOTE:
Empty dust cup when
debris reaches the MAX fill
line.
MAINTAINING YOUR VACUUM
EMPTYING THE DUST CUP
1
Disconnect the handheld vacuum by pressing the
Wand Release button on the top of the wand.
2
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons on either
side of the base then pull out.
3
Hold dust cup over a bin and press the Empty button
on the front of the dust dup. Close the bottom lid and
insert dust cup back into handheld vacuum, pressing it
until it clicks.
CLEANING THE FILTERS
1
Access the pre-motor filter by removing
the dust cup from the vacuum. Separate
foam filter from felt filter frame and rinse
them with water.
DO NOT
use soap. Tap
loose dirt off filters as needed. Allow filters
to air-dry completely, then reinsert them
and reattach the dust cup to the vacuum.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
Clean once a month.
Post-Motor Filter
Clean every 9 months.
FOAM FILTER
FILTER SCREEN
FELT FILTER FRAME
POST-MOTOR FILTER
STEP 1
STEP 1
STEP 2
STEP 3
STEP 3
STEP 2
Wand
Release
2
Press the Empty button to open the door
then pull the screen to remove from dust
cup. Remove any hair or debris that may be
wrapped around it and tap off dirt as needed.
To replace push firmly back in place.
3
Access the Post-Motor filter under the
handle. Remove the filter and rinse it with
water.
DO NOT
use soap.
