MAINTENANCE
EMPTYING THE DUST CUP
Press the wand release button and lift the handheld
vacuum off the wand.
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
To remove the dust cup from the handheld vacuum,
squeeze the two
Dust Cup Release
buttons at the
same time and pull out the dust cup. Press the
Empty
button on the front of the dust cup.
Regularly clean and replace the filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup
reaches the MAX fill line.
MAINTENANCE
CLEANING FILTERS
IMPORTANT:
Unplug the vacuum before performing any maintenance.
IMPORTANT:
Unplug the vacuum before performing any maintenance.
NOTE:
The pre-motor filters should be
replaced every 2.5 years. The post-motor filter
should be replaced every 3 years.
PRE-MOTOR FILTERS
POST-MOTOR FILTER
Replacement Pre-Motor Filter Kit
XPMFK320
Replacement Post-Motor Filter
1084FTV320
REPLACEMENT FILTERS
OR
Empty
Dust Cu
p
Release
WAND
The
Pre-Motor Filters
should be washed
once a month.
The
Post-Motor Filter
should be washed
once every year.
sharkclean .com
sharkclean .com
