background image

sharkclean .com

sharkclean .com

   WARNING

 

To reduce the risk of fire, electric shock, injury, or property damage:

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit, 

contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

For the latest warnings and cautions, go to

 sharkclean.com/robothelp

GENERAL WARNINGS

When using an electrical appliance, basic 

precautions should always be followed, 

including the following:

1.  

This appliance consists of a Wet/

Dry Robot Floor Cleaner vacuum and 

charging dock with power supply. 

These components contain electrical 

connections, electrical wiring, and 

moving parts that potentially present risk 

to the user.

2.  

Before each use, carefully inspect all  

parts for any damage. If a part is damaged,  

discontinue use.

3.  

Use only identical replacement parts. 

See replacement accessories page of this 

booklet. 

4.  

This Wet/Dry Robot Floor Cleaner 

contains no serviceable parts.

5.  

Use only as described in this manual.  

DO NOT

 use Wet/Dry Robot Floor 

Cleaner for any purpose other than those 

described in this manual.

6.  

With exception of filters, dust cups and 

pads, 

DO NOT

 expose any parts of the 

Wet/Dry Robot Floor Cleaner to water or 

other liquids.

USE WARNINGS

7.  

This appliance can be used by persons  

with reduced physical, sensory or mental 

capabilities or lack of experience and 

knowledge if they have been given 

supervision or instruction concerning 

use of the appliance in a safe way and 

understand the hazards involved. 

  a)  Children shall not play with the 

appliance.

 

  b)  Cleaning and user maintenance shall 

not be made by children without 

supervision.

8.  

Always turn off the robotics vacuum 

cleaner before inserting or removing the 

filter, dust bin, or fluid reservoir.

9.   DO  NOT 

handle plug, charging dock, 

charging cable, or Wet/Dry Robot Floor 

Cleaner with wet hands. Cleaning and 

user maintenance shall not be made by 

children without supervision.

10.   DO  NOT

 use the robot without the dust 

bin, filter, and fluid reservoir in place.

11.   DO  NOT

 damage the charging cord:

 

 

a)    

DO NOT

 pull or carry charging 

dock by the cord or use the cord as 

a handle.

 

  b)  

DO NOT

 unplug by pulling on cord. 

Grasp the plug, not the cord.

 

  c)  

DO NOT

 close a door on the cord, 

pull the cord around sharp corners, 

or leave the cord near heated 

surfaces.

12.   DO  NOT

 put any objects into nozzle or 

accessory openings. 

DO NOT

 use with 

any opening blocked; keep free of dust, 

lint, hair, and anything that may reduce 

airflow.

13.   DO  NOT

 use if Wet/Dry Robot Floor 

Cleaner airflow is restricted. If the air 

paths become blocked, turn the vacuum 

cleaner off and remove all obstructions 

before turning on the unit again.

14.    

Keep all vacuum openings away from 

hair, face, fingers, uncovered feet, or 

loose clothing.

15.   DO  NOT

 use if Wet/Dry Robot Floor 

Cleaner is not working as it should, 

or has been dropped, damaged, left 

outdoors, or dropped into water.

16.   DO  NOT

 place vacuum cleaner on  

unstable surfaces,

17.  

If robot is placed in a room, and it is not 

starting from the dock, the robot must 

be placed in an unobstructed circle of 1.5 

ft. (45 cm) away from edges and cliffs.

18.   DO  NOT

 use to pick up:

 

  a) Liquid spills

 

  b) Large objects

 

  c)  Hard or sharp objects (glass, nails, 

screws, or coins)

 

  d)   Large quantities of dust (drywall 

dust, fireplace ash, or embers). 

DO NOT

 use as an attachment to 

power tools for dust collection.

 

  e)  Smoking or burning objects (hot 

coals, cigarette butts, or matches)

 

  f)  Flammable or combustible 

materials (lighter fluid, gasoline,  

or kerosene)

 

  g)  Toxic materials (high 

concentrations of chlorine bleach 

liquid, high concentrations of 

ammonia, or drain cleaning 

solution)

19.   DO  NOT

 use in the following areas:

 

  a) Outdoor areas near fireplaces with  

 

     unobstructed entrances

 

  b)  Spaces that are enclosed and may 

contain explosive or toxic fumes 

or vapors (lighter fluid, gasoline, 

kerosene, paint, paint thinners, 

mothproofing substances, or 

flammable dust

 

  c)  In an area with a space heater

 

  d)  Near fireplaces with unobstructed 

entrances 

20.  

Turn off the Wet/Dry Robot Floor 

Cleaner before any adjustment, cleaning, 

maintenance or troubleshooting. Note: in 

the OFF (O) position, the robot still uses 

a small amount of power.

21.  

Allow all filters to air-dry completely 

before replacing in the Wet/Dry Robot 

Floor Cleaner to prevent liquid from 

being drawn into electric parts.

22.   DO  NOT

 modify or attempt to repair 

the Wet/Dry Robot Floor Cleaner or the 

battery yourself, except as indicated in 

this manual. 

DO NOT

 use the vacuum if it 

has been modified or damaged.

23.  

Remove all spilled or leaked liquid from 

the dock landing mat, base or floor, as it 

could lead to risk of electrical shock. 

24.  

Try on an inconspicuous small area of 

the floor, a little bit of the VACMOP™ 

cleaning solution to ensure it does not 

affect the floor. 

25.  

When refilling the reservoir, check for 

leaks, as pooled liquids are a slipping 

hazard and may cause electrical shock. 

If the reservoir is damaged, it must be 

replaced.

26.  

Use caution walking on mopped floors, 

as they may be slippery while damp.

27.  

For your robot's cliff sensors to work 

properly, all runners, rugs, carpets, or 

small thresholds (like child gates) must 

be 8 inches from any stairs (or must be 

continuous and extend over the edge 

of the stairs). If a runner, rug, carpet, or 

small threshold that is less than 8 inches 

from the stairs cannot be moved, you 

must use a no-go zone or a BotBoundary 

strip to block off the stairs. BotBoundary 

strips are not included with your robot.

BATTERY USE

28.  

The battery is the power source for 

the vacuum. Carefully read and follow 

all charging instructions.

29.  

To prevent unintentional starting, ensure 

the vacuum is powered off before picking  

up or carrying the vacuum. 

DO NOT 

carry the appliance with your finger on 

the power switch.

30.  

Use 

ONLY

 the Shark® charging dock 

XDCKRV2000 and use only battery 

RVBAT850A. Use of batteries or battery 

chargers other than those indicated may 

create a risk of fire.

31.  

Keep the battery away from all metal 

objects such as paper clips, coins, keys, 

nails, or screws. Shorting the battery 

terminals together increases the risk of 

fire or burns.

32.  

Under abusive conditions, liquids may be 

ejected from the battery. Avoid contact 

with this liquid, as it may cause irritation 

or burns. If contact occurs, flush with 

water. If liquid contacts eyes, seek 

medical help.

33.  

Robotic vacuum cleaner should not be 

stored, charged, or used at temperatures 

below 50°F (10°C) or above 104°F 

(40°C). Ensure the battery and vacuum 

have reached room temperature before 

charging or use. Exposing the robot 

or battery to temperatures outside of 

this range may damage the battery and 

increase the risk of fire.

34.   DO  NOT

 expose the Wet/Dry Robot 

Floor Cleaner or battery to fire or 

temperatures above 265°F (130°C) as it 

may cause explosion.

35.  

Non-rechargeable batteries cannot  

be recharged.

NO-GO ZONES AND BOTBOUNDARY® STRIPS

36.   DO  NOT

 put BotBoundary strips 

underneath carpet or rugs.

37.   DO  NOT

 place BotBoundary strips on 

top of one another.

38.  

Always use no-go zones or BotBoundary 

strips around reflective flooring and 

surfaces. 

39. 

 No-go zones or BotBoundary strips 

should always be used near carpeted 

stairs. 

40.   DO  NOT 

use no-go zones or 

BotBoundary strips strips within 10 feet 

of the dock.

41.  

For your robot's cliff sensors to work 

properly, all runners, rugs, carpets, or 

small thresholds (like child gates) must 

be 8 inches from any stairs (or must be 

continuous and extend over the edge 

of the stairs). If a runner, rug, carpet, or 

small threshold that is less than 8 inches 

from the stairs cannot be moved, you 

must use a no-go zone or a BotBoundary 

strip to block off the stairs.

LASER WARNING

42.  

This product has a Class 1 laser. It is 

safe under reasonably foreseeable 

conditions (as defined in this Owner's 

Guide.) Always turn off the power before 

lifting the robotic vacuum cleaner or 

performing any maintenance on it.

43.   DO  NOT

 look directly into laser.

Summary of Contents for AI Robot VACMOP 2000WD Series
















Reviews: