Shark SMT • 9.800-504.0
17
OPERATING INSTRUCTIONS
STEP 1:
Turn water on.
STEP 2:
Grip spray gun handle
se cure ly and pull trigger. Then turn
variable pressure control handle
counterclockwise.
STEP 3:
Before installing noz-
zle, turn on water supply and run
machine, allowing water to flush
through the system until clear.
When a steady stream of water
fl ows from the spray gun and wand
the ma chine is ready for cold water
cleaning by turning the variable
pres sure control handle clockwise
to raise the pressure.
For hot water washing, turn the
switch to the burn er position. (The
burner will light au to mat i cal ly when
the trigger on the spray gun is
pulled.)
98005040-10
NOTE: High pressure nozzle must be in sert ed at end of wand to
obtain high pressure. To apply detergent, read operator's manual.
98005040-13
SenDEC
TA
CH/HOUR
1/10
High Pressure Hose
Safety Latch
Trigger
Nozzle Quick Coupler
