Shark SMT • 9.800-504.0
15
98005040-5
98005040-6
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach a 5/8" garden hose
to inlet connector. Minimum fl ow
should be 5 gpm.
STEP 2:
Attach high pressure hose
to discharge nipple using quick
coupler. Lock coupler securely into
place by pulling back coupler collar
and inserting it onto discharge nipple,
then pushing collar forward to lock
in place.
NOTE: If using detergent injec-
tor, attach detergent injector to
discharge nipple using quick cou-
pler. Attach high pressure hose to
other end of detergent injector.
STEP 3:
Attach wand to spray
gun using tefl on tape on threads
to prevent leakage. Attach swivel
connector on discharge hose to
spray gun using teflon tape on
threads. Attach swivel connector
on high pressure hose to spray
gun using tefl on tape on threads.
Engage safety latch to prevent from
triggering gun.
STEP 4:
Check oil level on sight
glass on backside of pump. Oil
should be visible one-half way up
sight glass (SAE 10-40W non-
detergent). The oil level can also be
checked by using the dipstick on the
top of the pump.
STEP 6:
On electric start models,
you will need to install a battery
making sure that the red cable is
attached to the positive terminal.
Use a Group U1 garden tractor style
type of battery rated for 300 CCA
(battery not included).
NOTE: Battery is required for
burner to operate.
CAUTION: These machines are
intended to be protected from
outside environments.
CAUTION: Risk of injury. Dis-
connect battery ground terminal
before servicing.
POS
NEG
98005040-9
Safety
Latch
High Pressure
Hose
Discharge
Nipple
Detergent
Hose
Red
Black
Detergent
Injector
(Option)
98005040-4
Inlet
Connector
STEP 5:
Fill gasoline tank and
check engine oil.
Gasoline
Tank
98004040-8
Diesel Fuel
Tank
Fill diesel tank with diesel fuel.
CAUTION: Do not confuse diesel
fuel and gasoline when filling
tanks. Keep proper fuel in proper
tanks.
NOTE: Diesel Fuel Shut-off must
be in the ON position prior to
turning on burner.
Dipstick
