6
DG SERIES PRESSURE WASHER
OPERATOR’S MANUAL
Shark DG • Rev. 1/03
COMPONENT IDENTIFICATION
ALL MODELS
Pump
— Develops high pressure.
Starter
Grip
— Used for starting the engine manually.
Spray Gun
— Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector
— Allows you to siphon and mix
detergents.
Straight Through Wand w/Grip
— Must be connected
to the spray gun.
High Pressure Hose
— Connect one end to water pump
discharge nipple and the other end to spray gun.
Pump Protector
— Cycles fresh cool water through
pump when recirculating water reaches 140°F.
NOTE: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm wa-
ter will discharge from pump protector onto floor.
This system prevents internal pump damage.
Pressure
Nozzle
Wand
Spray Gun
Trigger
High Pressure
Hose
Detergent
Bucket
(not included)
Unloader
Garden Hose
(not included)
Detergent Injector
Pump
▲ ▲ ▲ ▲ ▲
Pump
Protector
Starter
Grip
Soap Nozzle
High Pressure
Nozzles
Inlet Strainer
Wand Grip
Detergent
Pick-Up Tube
