5
2.2
Installation
Installation Method 1
：
(1) To remove SkyPort cover of the drone, press and hold the release button and turn the cover
so it can be removed.
(2) Remove SkyPort cover of the camera, align the white point of the camera with the red point
of the drone, and embed it in the installation position.
(3) Rotate the camera to the lock position, align the red dots, the camera is installed.
Pic 2 Skyport Installation
Removal steps:
(1) To remove camera, press and hold the release button, rotate the camera in the opposite
direction until the red point is aligned with the white point, then remove the camera;
(2) Replace the SkyPort cover and lens cover.
Installation Method 2
：
(1) There are four M3 threaded holes at the bottom of the camera with 6 mm depth, and the
threaded hole center is located on the outer circle with the diameter of 124 mm. The bottom of
the mounting hole is equipped with 4 damping balls.
(2) Users can design installation structures according to flight platforms of different structures,
and the installation methods are flexible and diverse.
Pic
3
Camera Fixing Hole Position