7
Steps of power on:
(1)
Mount the camera on the drone, and make sure the camera is secured
；
(2) Turn on the drone, the camera will start automatically and enter the self-test. The total
startup duration of the camera will be about 35s, the camera will beep once the startup is
completed.
【
During the startup process, the camera display successively displays: LOGO and firmware
version → initialization → starting up → startup completed
】
(3) After the camera is turned on, the TFT display interface is shown below
：
Pic 5 Camera Display
Display
Meaning
M300
Display the UAV model when using Skyport interface to connect
DJI drones, Display trigger signal when connect other drones.
Camera temperature:
＜
30
℃
blue
；＜
50
℃
yellow
；＞
50
℃
red
RTK status:
RTK has 3 display modes
Red-No solution
Yellow -Single point solution/ Floating point solution
Green -Fixed solution
The trigger commands that camera has received
Actual front view shooting numbers of the camera , zero after
power off
(4) The camera can be directly powered off after waiting at least 20 seconds for the last photo
taking.
(5) It is recommended to finish the all the checking operation before connecting the camera to
test the camera in order to avoid frequent camera restart caused by frequent on-off and
off-on of the UAV.
(6) The serial number in POS file corresponds to the Angle of view:
POS serial
number
1
2
3
4
5
Display
F
R
D
B
L