User’s Guide
HRT 65-125
-
6
-
hs
Safety
To ensure sfety when using the machine you should erad
this User’s guide carefully and follow the safety instructions
closely.
Attention!
The machine contains parts which are hot. Touching
them will cause burns.
Allow hot parts to cool sufficiently (at least 10 minutes)
before touching them.
Never touch the filaments or the reflectors when the
machine is in operation.
Always wear close fitting clothing.
Be particularly careful of sleeves and always tie back long
hair.
The machine may only be used for heating narrow
zones in flat plastic sheets.
Any other use could lead to
very hazardous situations or cause damage to the machine!
The plastic sheets that have to be bent may never be
thicker than 5 mm.
Before commissioning and servicing, always check the
connection cable and plug for defects.
When servicing, switch off the machine and remove the
plug from the socket.
Only switch on those heating elements which are
needed.
Never leave the machine unattended without switching
it off.
3
