User’s Guide
HRT 65-125
-
12
-
hs
Adjustment
7
3.
Loosen the socket head screw in the centre of the
heating element one half turn (use socket screw key
no.
3
).
4.
Take the heating element with both hands close to the
supporting prongs on the left and right, and slide it into the
desired position.
5.
Hold the heating element parallel to the front of the
machine and the supporting prongs. This prevents the
notched nuts in the
X
-profiles from binding.
6.
Hand tighten the socket head screws,
starting
in the
supporting prongs and
then
in the centre.
7.
Position the other profiles in the same way if necessary.
8.
Fill up the space between the heating elements as far as possible with
solid core strips and hand tighten them. First slide the notched nuts into
the aluminium
X
-profiles, roughly level with the holes and then lay the
solid core strip on top.
9.
Switch on the machine again as in section 6.
7.3
FILAMENT HEIGHT
1.
Adjust the height of the filament using the knurled nut.
These can be reached from the sides. Make sure that
the filament height is the same on both sides.
2.
Start up the machine again as in Section 11.
Knurled nut
1
3
4
