Getting Started
7
Note
• If you are not going to use the remote control for a long
time, remove the batteries.
• Do not use old and new or different types of batteries in
combination.
• Batteries contain chemical substances, so they should be
disposed of properly.
Note
• If this product is connected to a HDMI CEC compliant TV,
skip this setting. It switches automatically to the same
OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Always follow the instructions in this chapter in sequence.
Prepare the remote control
1 Open the battery compartment.
2 Insert 2xAAA batteries with correct polarity (+/-) as indicated.
3 Close the battery compartment.
1 Press
to turn on this product.
2 Turn on the TV and switch to the correct video-in channel
(refer to the TV user manual on how to select the correct
channel).
Find the correct viewing channel
Use the SETUP menu
Press
SETUP
to display the SETUP menu on the TV.
Navigate the menu
When a menu is displayed, press the buttons on the remote
control to navigate.
Move up or down.
Move left or right.
Confirm a selection.
1. Select [
General Settings
] in the
SETUP
menu.
2. Press / to select [
Language
] in the menu
3. Press to select [
OSD
], and press again to enter the
select menu, then you could select the language you
want.
4. Press
ENTER
to confirm.
Select menu display language
SETUP
SETUP
Summary of Contents for K-BD5106
Page 2: ......