www.shakmat.com
•
09/19
2x
5. Tactical Plan assembly
5.1
Male & Female headers (x2)
P2
Now, we are going to stack the Tactical Plan with the top PCB. For this we
use two 20 pin pairs of male & female headers. First assemble the headers,
then place them on the Tactical Plan, female side down. Then assemble the
two boards toghether and solder one pin, on each side, for each header. Once
the PCBs are held together and correctly aligned, you can solder all the remai-
ning points.
Be VERY careful with the soldering of the female part of the headers. Once
the potentiometers will be in place, those solder points will be inaccessible.
After everything is well soldered, disconnect the Tactical Plan and proceed to
the next step with the top PCB.
