4
7
1. Internal Stem 6. Crank Handle 11. Canopy
2. Internal Stem Cover (optional) 7. Slider Car Stop Pin 12. Strut
3. Bore Holes 8. Slider Car 13. Lower Hub
4. Turning Handle 9. Main Support Arm 14. Light Adapter
5. Mast 10. Upper Hub 15. Arm
9
11
12
5
6
7
8
1
2
4
13
10
333
14
15
D I A G R A M & P A R T S L I S T
You are now ready to operate your umbrella!
Option B: If you wish not to use optional internal stem cover, proceed below.
Using a two person team, lift umbrella with attached internal stem and install umbrella
onto mount kit, SM PLATE on your steel base weight. Tighten 5 bolts to secure
umbrella in place with allen wrench. Once complete, proceed below.
(Astral-TC Internal Stem shown)
Leveling Umbrella
Check the vertical position of the umbrella with a level tool.
If the umbrella is not level, lift optional internal stem cover to access internal stem.
Untighten the 5 bolts with 1-2 rotations (do not completely untighten bolts!). The internal
stem can rotate without applying force. Correct the vertical level position with leveling
screws.
Once leveled, re-tighten the 5 bolts with allen wrench on internal stem.
Note:
Do not
use power drill. May cause damage to umbrella. Slide optional internal stem cover
down and cover internal stem.
Summary of Contents for SR-27S
Page 1: ......
