background image

10

W A R R A N T Y :

Upon receipt of your Galaxy, please check to ensure you have received all of the parts.

NOTE:

Wind damage is not covered under any manufacturer’s warranty. 

5 Year Limited Warranty

includes the Libra, Astral-TC, Orion, Galaxy, Sirius and

Polaris styles. This includes the mast, boom, head fitting, elbow, center pole/sidepost,
arms, ribs, top and bottom hub and stainless steel hardware only. If there is damage
under the warranty, Shademaker will replace and/or repair any item listed in this
category at its discretion. Labor charges are not covered under this limited warranty.

10 Year Limited Warranty

includes the Sunbrella

®

awning & marine grade Fabric

Collection. Visit www.sunbrella.com/warranty for more details. Labor charges are not
covered under this limited warranty.

The 

5 Year Limited Warranty

applies to Sunbrella Firesist

®

, Sunbrella Firesist

®

PLUS

and Sunbrella

®

Furniture Grade, and O’bravia

®

awning fabrics. Labor charges are not

covered under this limited warranty.

1 Year Limited Warranty

covers base wheels and the powder coat finish on all bases.

If the powder coat finish flakes, bubbles, peels or loses color; Shademaker will re-finish
or replace the defective bases at its discretion. Normal wear and tear is not covered
under this limited warranty. Labor charges are not covered under this limited warranty.

Exclusions: 

Wind damage, acts of nature (such as, but not limited to, freezing or any

type of extreme weather).  Failures caused by abusive use and normal wear and tear
are not covered under this warranty. Any Galaxy style that does not have any spacer
buttons installed is not covered by warranty.

Parts can be ordered under warranty at no charge, if found that the damage is a
manufacture defect and/or purchased out of warranty to make them whole again. 

Those filing warranty claims will be responsible for all shipping, handling and freight
charges on all claims to Shademaker in Baldwin Park, CA.  All warranty claims must be
submitted with the original proof of purchase, date of purchase, name of dealer and the
description of the damage.  An authorized Shademaker RA# must be listed on all
products being returned. The Shademaker warranty is not transferable. Shademaker
reserves the right to repair, replace and/or redesign any product that is returned under a
warranty claim. 

For current warranty information, please visit www.shademakerusa.com.

T O   P R O P E R L Y   F O L D   C A N O P Y

The 100% solution dyed canopy will last longer if you fold it as it was packed and
shipped.  This technique is similar to the way a parachute is folded and is especially
important when folding the canopy for seasonal storage or when left in the closed
position for an extended period of time.  

Using this technique at all times will significantly extend the life of the canopy.

1. When the canopy has been fully lowered, stand in front of the

canopy structure and begin the folding process by pulling out
two panels opposite the mast.  

   Pull the two panels together and roll tight into the canopy.

2. Once rolled tight, pull adjacent panels out one at a time and

fold to the center, alternating sides until all the panels have
been pulled out from the arms and folded into the center.

3. Wrap and secure strap around the canopy.

P R O T E C T I V E   C O V E R

1. Screw rods together and insert into slit of the cover.
2. Unzip cover.
3. Using the rod as a guide, slide cover over your umbrella. 
4. Pull on string to zip down your cover and tie.

M A I N T A I N I N G   F R A M E   &   F I T T I N G S

1. Hose frame with water periodically, more often if installation is in a salty or industrial

environment.

2. Inspect the installation fitting on a regular basis and tighten if necessary.

M A I N T A I N I N G   C A N O P Y   F A B R I C

1. Clean up spills and stains right away.  Spills can be removed by using a clean,

absorbent cloth.

2. For general maintenance, use a soft brush to remove dust and dry soil or wash

down with clean, warm water (i.e. garden hose) every so often so dirt does not
become engrained. Allow the fabric to dry naturally before closing the canopy.

3. If a thorough cleaning is necessary, sponge over the fabric using a mild soap

solution (2% solution). Rinse well with plenty of water to remove all soap residue.

4. Never use detergents, cleaning fluids, or solvents.  Grease and oil stains may be

removed by using turpentine or similar with an absorbent cloth.

5. We recommend giving the canopy a good clean on a more frequent basis if

installed in a location where the canopy is likely to become soiled.

R E M O V A L   &   R E P L A C E M E N T   O F   C A N O P Y  

Follow these instructions should you choose to replace your canopy with a new canopy.

1. Lower the canopy to the closed position.
2. Remove bolts holding canopy structure to the boom.  Use a two to four-person

team to remove the canopy structure from the boom.

3. Unscrew the anchor shackle from the coupler to separate mast pulley and winder

pulley. Use caution, so the mast pulley does not fall back into the boom.

4. Unfasten Velcro from the canopy vent cap.
5. Drill out the canopy strap bolts from the top of the arms.
6. Remove canopy fabric from canopy structure.
7. To replace canopy, reverse the above process.

Summary of Contents for GALAXY-35S













Reviews: