16
|
| ASSEMBLY
Check that the distance of the terminal bar
connection from the outside of the terminal
bar is 47 mm (see fig. 24); once this has been
checked, the screws can be tightened.
Insert the terminal bar caps (see ref. 28 fig.
25). Check that the terminal bar is centred
with the cassette. Now try to close the awn-
ing.
fig.25
fig.24
28
Assemble the terminal bar inserting the fabric
in the ogive (see ref. 27 fig. 23) in the terminal
bar. Sliding the terminal bar, check that the 2
plates of the terminal bar connections are in
their proper place.
fig.23
27
For sizes larger than 4 m, fix the conveyor to
the centre of the awning (see ref. 26 fig. 22).
26
fig.22
47 mm
fig.21
Install the awning on the brackets fixed to the
frame (see ref. 24 fig. 21). Block the awning
with the screws provided (see ref. 25 fig. 21),
(Allen wrench 5).
24
25