12
|
| ASSEMBLY
5 - AWNING ASSEMBLY
IMPORTANT
Before starting assembly, the person appointed to do the job must have cut the pieces
to suit the size of the awning that is to be obtained (see tab. 3 par. 3.3).
Define the distance of the brackets (see fig.
3) and position them on the awning assembly
frame.
Assemble the fabric (see ref. 1 fig. 4) with
the roller tube (see ref. 2 fig. 4) and roll it up
completely.
Insert the cap with hole (see ref. 3 fig. 5) on
the side opposite the control (see ref. 4 fig.
5).
MANUAL AWNING:
Insert the cap with square pin (see ref. 5 fig.
6) in the roller tube (see ref. 6 fig. 6).
fig.6
fig.4
fig.5
fig.3
1
2
3
4
5
6