shada 240120 Series, Operating Manual

Page: 5 / 24

5
04 Modification of the product
The product may not be changed or adapted. Do not use the product for other purposes than
described in the manual.
05 Security related information
Keep this product out of reach of children or animals. This product is not a toy, LED lights are
extremely bright and looking directly at the light source during operation can lead to seri-
ous eye damage. Any other use of the device than described in the manual may damage the
product or cause danger to the user, e.g. due to a short circuit, fire or electric shock.
The safety instructions must be observed at all times.
06 Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety in-
structions of the device. Furthermore, we are not liable for consequential damage, damage
to objects or persons resulting from failure to observe the safety instructions and improper
use/handling of the device due to wear and tear. Product design and specifications are sub-
ject to change without notice. All logos and trade names are registered trademarks of their
respective owners and are hereby acknowledged as such.
07 Storage of the Manual
Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the commission-
ing and handling of the device. Keep all enclosed operating instructions for future reference.
If the device is sold or passed on to third parties, you are obliged to pass on the operating
instructions as these are lawfully part of the product.
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of the product.
If damaged, it must not be put into operation. This product may only be installed by a quali-
fied technician.
Installation:
1. Decide where to mount the luminaire.
2. Disconnect from the mains.
3. Secure against being switched on again.
4. Verify that there is no voltage to your cable.
5. Follow the enclosed steps. („Fig. 1“ on page 2)
We can only ensure the correct function of the sensor when the product is mounted to the
ceiling.
09 Operating the product
The safety instructions and warnings must be observed to ensure both the perfect condition
of the product and safe operation.
10 Product maintenance
The product can be cleaned with clear water and a soft cloth. Do not use detergents contain-
ing surface active agents or scouring agents.