SH Scientific SH-AC-100M, Manual

Page: 10 / 16

(1) TEMP mode
(3) BEEP mode
(2) TIME mode
If you want a minute-second or day-hour time combination instead,
feel free to contact your supplier.
※The first 2 digits=hours
The last 2 digits=minutes
※Be aware that 00.00 means infinite value.
The unit will continue to run until the user manually turns it off.
The span of time set under beep mode is the duration of the beeping once the set
operating time has been finished.
1 buzzer sound/sec.
The BEEP timer will only operate once TIME mode is set.
6. SETTING AND OPERATION
SETTING AND OPERATION
10
Value
shift/edit
Time Controller
Display
Time setting
99HR 59MIN(max)
00.00 set as
continuous run
Step1. From TEMP MODE,
press the MODE button for
1 sec to move to TIME MODE.
Step2. Set your desired time.
Step3. Press MODE button for 3 sec
to get out of mode-setting or
press MODE button for 1sec
to move to BEEP mode.
BEEP Controller
Display
Beep span
Value
shift/edit
Step1. From TIME MODE,
press the MODE button once to
go to BEEP MODE.
Step2. Enter your desired span of
Beeping Time.
Step3. Press MODE button for 3 sec
to get out of mode-setting
Value
shift/edit
Temp Controller
Display
Temperature
setting
Step1. To set the TEMP MODE,
press and hold the MODE
button for 3 sec.
Step2. Set your target temperature.
Step3. Press MODE button for 3 sec
to get out of mode-setting or
press MODE button for 1sec
to move to TIME mode.
Step3. Press MODE button for
3 sec to get out of mode-
setting or press MODE
button for 1 sec to move to
TEMP mode.