EN
appendice
page
5
I
D
F
E
Technical Characteristics
Power supply:
90÷260V - 50/60Hz - Universal, automatic voltage change.
Lamp:
250W 24V-EVC M/33, G6.35 connector - Life approx. 300 hours.
Absorbed power:
300 W
Optic unit:
Mirrored parabola with very high luminous yield, designed for Victory.
Optic system:
Mirrored pa 70mmø lens + 90mmø lens, screw focusing.
Lenses:
In glass with high transmission coefficient.
Mirror:
Ultra-high reflection, in special glass.
Electronics:
Entirely developed by engineers of the SGM Research & Development
Laboratory. Has a power supply card (CS 0207) and a logic card (CS 0208).
Settings:
By means of dip-switches, to address the control channels of the projector and
to set the selectable options:
- PAN/TILT scanning inversion;
- 8 or 16-bit mirror movement resolution;
- Control mode: Remote (from remote control), or Auto for automatic
functioning independent of the projector.
Motors:
5 a micro-stepper motors, 5 DC motors.
Input:
Digital serial signal DMX512 or RS232/423.
Control channels:
ch1 - dimmer / ch2 - colour / ch3 - gobos / ch4 - shutter/strobe / ch5 - pan
ch6 - tilt / ch7 - gobo rotation / ch8 - palette / ch9 - prism and prism rotation
ch10 - reset / ch11 - pan 16bit / ch 12 - tilt 16bit
Mirror movement:
Mirror rotation by means of 2 extra high-precision micro-stepper motors and
controlled by the relevant control card. Option to invert mirror scanning.
Safety regulations:
The Victorys are in conformity with current CE regulations.
Safety devices:
IP20 degree of protection. Automatic power cut-off in case of overheating or
cooling system operation failure.
Cooling system:
Forced through 1 axial fan.
Body:
In die-cast extruded aluminium. Epoxy-powder enamelling.
Mounting bracket:
In epoxy-powder enamelled steel. Installation position with adjustable
inclination over 110°.
Dimensions:
cm 18 x 65 x 35. Weight: Kg 14.
SGM Elettronica reserves the right to make improvements and modifications
to its products at any time.
Always refer the manual to the equipment it pertains to in order to avoid mistakes
and straying from the actual functions as illustrated in the manual.
