GB
XM368-V1.2 -B
Idea Par Led Zoom RGB
6
Overhead rigging
Screw the bolt of the clamp into the hold of the bracket, and tighten the screw underneath.
Pull the safety-rope through the holes on the bracket of the base and over the trussing system or a safe
fixation spot. Insert the end in the carabine and tighten the safety screw.
DMX-512 control connection
The product has a DMX 512 input fitted with standard 5-pin XLR connectors. Screened cables in compliance
with EIA RS-485 specifications and the following characteristics must be used for connections:
- 2 conductors plus screen
- 120Ohm impedance
- low capacitance
- max. transmission rate 250kBaud.
Cable connections:
see illustration, taking care with the screen, which must be connected
to Pin 1
Address 13 Address 7 Address 1
Please note:
to ensure maximal stability, when the voltage is 120V, only six devices may be connected
