GB
SGM
Fogger 1000 - Fogger 1500
8
12
SGM
F
OGGER
1000
&
F
OGGER
1500
ON
-
BOARD
DMX
FOG MACHINE
S
ETTINGS
DMX Setting for Fogger1500 and Fogger 1000 fog machines with on board DMX
Channel A
0 - 128 = OFF
129 – 255 = Maximum Volume Output (100%)
The Fogger 1500 and Fogger 1000 fog machine have on-board DMX control. These two models
use 1 channel to control on/off operation. Each channel has a value range of 0 to 255. On/Off function
can be programmed using the DMX controller or the DMX control software being
used by lighting and effects operator.
If Channel A has a value from 0 to 128, the unit is OFF.
Between the values 129 to 255 the volume of fog output is is at maximum.
Note:
In the example above, if the machine were assigned the DMX address of 130, Channel A would
correspond to DMX address 130.
In general, SGM fog machines with onboard DMX conform to the following performance specifications:
1. Average Operating temperature = 250ºC
2. Fogger can maintain maximum output for 30 seconds or more
13
A
DDRESSING
Each device occupies 1 channel. To ensure that the control signals are properly directed to each device,
they require adressing. This is to be adjusted for every single device by changing the DIP-switches as set
out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are
addressed similarly, they will work similarly.
Occupation of the DIP-switches:
Setting the DMX- ddress:
DIP-switch no.
1
2
3
4
5
6
7
8
9
Device & channels
Starting address
1
2
4
8
16
32
64
128 256
On
▲
Device 1 – channel 1
Off
On
▲
Device 2 – channel 2
Off
On
▲
▲
Device 3 – channel 3
Off
On
▲
Device 4 – channel 4
Off
On
▲
▲
Device 5 – channel 5
Off
www.audiovias.com
