GB
SGM
Fogger 1000 - Fogger 1500
4
5
O
PERATION
Add fluid carefully to the liquid tank. Do not overfill the tank.
Plug power cord into a grounded electrical outlet. Turn the power switch to “ON” on the back of the
machine. The unit will take a couple of minutes to warm up the heater. During this time the machine
cannot generate fog. When the remote control is attached the red lights and green light (on the
remote) will flash and stay ON when the warm-up time is complete.
To emit fog press the button on the remote (if it is connected) for the desired length of time.
For further information on operating your Fogger 1000 and Fogger 1500 fog machine, see the section
titled “Remote Control Operation”.
Important!
Always monitor tank fluid level as you are fogging. Running a fog machine with no fluid can
permanently damage the unit.
FOGGER 1500:
Your model includes a mounting bracket designed for overhead installation; it may be
installed at floor level or suspended overhead. If the unit is to be mounted using the
bracket, it is important that the fog does not shoot directly at any one’s face.
Whatever installation method you choose, do not allow the unit to have more than a
25 degree angle of inclination.
FOGGER 1500 Description
Front
Safety Eyelet
Fluid Tank
Rear
Dip Switches
Fluid Level
Jack Plug for Z-10
Power Supply
Power Switch
DMX Receiver
www.audiovias.com
