background image

EN

appendice

page 1

I

D

F

E

General warnings

Carefully read the warnings contained in this manual, since they supply important instructions concer-

ning safety of installation, use and maintenance.

It is very important that this manual be kept with the equipment for future consultation. 

In case of sale or transfer of the equipment to another user, ensure that this manual always

accompanies the equipment to allow the new owner to obtain information about the operation

and the relevant warnings.

• Not for residential use.

• After unpacking check the integrity of the equipment. In case of doubt, do not use the equipment,

and contact an authorized SGM Technical Service Centre.

• The packaging materials (plastic bags, expanded polystyrene, nails, etc.) must be kept out of reach

of children since they are potential sources of danger.

• This equipment may only be operated by adults. Do not allow children to tamper with the machine

or play with the product.

• The electrical and mechanical work necessary for the installation of the equipment must be carried

out by a qualified electrician or by a competent person.

• Before connecting the unit, check that the data on the registration plate is the same as that of the

electrical grid.

• Avoid using the equipment:

- in places subject to excessive humidity

- in places subject to vibrations or knocks

- in places with temperatures higher than 45°C or lower than 2°C 

- Protect the equipment from excessively humid conditions

(the optimum values are between 35 and 80%).

• Do not disassemble or modify the equipment.

• Prevent inflammable liquids, water or metallic objects from penetrating the equipment.

• In case of spilling liquid on the equipment, immediately disconnect the power supply of the mixer.

• The minimum distance between the projector and the surface to be illuminated must not be less

than 1.5 m.

• In case of serious functioning problems, switch off the equipment and contact the nearest SGM

retailer or the manufacturer directly for inspection.

• Avoid opening the equipment: there are no parts repairable by the user.

• Never try to repair the equipment alone. Repairs carried out by inexpert persons may cause damage

or serious malfunctioning.  Contact the nearest authorised Technical Service Centre.

Always insist on original spare parts.

Protect the environment: do not throw the packaging in your dustbin,

but return it to your retailer or take it to a collection point for special

waste disposal.

Summary of Contents for Flasher DMX 1.5









Reviews: