14
Installing the R-2 Rail Light
To attach the R-2 Rail Light to a track rail:
1
Insert the fixture with the polarity groove opposite the polarity ridge on
the track rail.
NOTE: Make sure the rotational phase selector is set to
‘OFF’ before you insert the fixture in the track rail.
2
Push the fixture into the track rail until it snaps into place.
3
Turn the twist locking mechanism to secure the fixture to the track rail.
4
Choose the appropriate power circuit by turning the rotational phase
selector (1, 2, or 3).
5
To remove the fixture from the track rail, set the rotational phase selector
to ‘OFF’, reverse the twist locking mechanism, and pull the fixture out
from the track rail.
4
3
2
1
Polarity ridge (highlighted)
Manual_R-2_170x113,3.book Page 14 Thursday, June 4, 2015 9:39 AM
